Rear valance mod (4) 05/05/03

<< Prev << >> Next >>

A view after the body filler was first sanded with 80 grit paper. More filling was needed in some low areas.

After its first 600 grit wet and dry.

Primer was then sprayed as a guide coate to ade further flatting and show area that needed stopper added.

The rebuilt tops. Both needed the 'bolt cut out' repaired with the right side needing a full rebuild. The mark on the right if for the expansion overflow hole.

<< Prev << >> Next >>

	A view after the body filler was first sanded with 80 grit paper. More filling was needed in some low areas.
	After its first 600 grit wet and dry.
	Primer was then sprayed as a guide coate to ade further flatting and show area that needed stopper added.
	The rebuilt tops. Both needed the 'bolt cut out' repaired with the right side needing a full rebuild. The mark on the right if for the expansion overflow hole.