Rear light Mod (4) (Upgrade to 2002 MY)

13/06/03

<< Prev <<
Now I got this far I seem to have a bit of a problem with the lights themselves. From the bulb configuration it seems like the layout should be (From Number plate out).

Reflector
Reversing
Fog
Rear and Brake
Indicator
Rear

	The back of the Lotus lights supplied. Notice the Left side is sealed with no bulb holder and two wires to the other even though it has a dual filament bulb and holder. Only one half of the outter lamp has three wires? I will mod this so that the whole outter ring is used for the brakes buy swapping the holder with that used for the fog and using the necessary bulbs.
	I used the conector from the old lights and soldered it on to the new. The joints have been covered with insulating tape. I will do the outer ring brake mod at a later date. Take a look at the images section for an external view once fitted.