|
The leather A post covers need to be fitted first. They simply clip in to the clear plastic bungs shown here and are glued under the door seal. |
|
The side panels are held on by two screws which can be seen from the outside of the door opening above the seal. The excess material is then pulled into the sunroof opening and glued under the sunroof seal. As I was fitting an internal Ariel that also had to wired and taped into place to conceal the cables. |
|
Before gluing the side I decided to test fit the rear panel to ensure no uncovered areas could be seen. |
|
With some basic trimming made I glued the side and started to fit the rear, no forgetting the seatbelt. |
