Rear light Mod (2) (Upgrade to 2002 MY)

03/05/03

<< Prev << >> Next >>
It soon became apparent that the job would be easier if I removed the rear bumper.

The areas around the lights were easy to remove. However The lip proved more problematic. I then decided to remove the bumper and use a larger cutting disk.

Once the bumper had been removed cutting off the lip only took 15 minutes!!. To get a true edge I ran the dremel along parrallel with my knuckle pressing againt the lip.

All areas removed. I could now push up the panel and mark the where the holes needed to be drilled for the end bolts.

First test fit, Not bad.

<< Prev << >> Next >>

	The areas around the lights were easy to remove. However The lip proved more problematic. I then decided to remove the bumper and use a larger cutting disk.
	Once the bumper had been removed cutting off the lip only took 15 minutes!!. To get a true edge I ran the dremel along parrallel with my knuckle pressing againt the lip.
	All areas removed. I could now push up the panel and mark the where the holes needed to be drilled for the end bolts.
	First test fit, Not bad.