Front brakes mod (3)

12/04/04

<< Prev <<>> Next >>

The order of hub bearing parts removed from left to right. Cap, Pin, ?, Nut, Washer, Outer Bearing. All part cleaned and stored for refitting.

With the hub off you can see the splash and heat shield.

Back of disc and hub showing inner bearing and grease seal.

To remove the splash shield (Increase cooling) you need to removed two bolts. Note if you have ABS this is also used to mount the sensors and therfore still required.

<< Prev <<>> Next >>

	The order of hub bearing parts removed from left to right. Cap, Pin, ?, Nut, Washer, Outer Bearing. All part cleaned and stored for refitting.
	With the hub off you can see the splash and heat shield.
	Back of disc and hub showing inner bearing and grease seal.
	To remove the splash shield (Increase cooling) you need to removed two bolts. Note if you have ABS this is also used to mount the sensors and therfore still required.