|
These bolts needed some WD40 but actually came undone easier than expected. |
|
Mounting bolts and bracket removed. I had also removed the dome cap over the hub bolt with a gentle tap and wiggle. Care should be taken when doing this as you dont want to dent it out of shape. |
|
Now to remove the hub to get to the disc. Straighten up the slipt pin and remove.You can then remove the erm dont know whats its called but its to stop the nut from turning. |
|
You can now undo the nut (33mm). I then pulled the hub slightly and re seated to remove the washer and outer bearing. |
